Skip to the end of navigation

Welcome to the Community!

Cybershot Cameras

Showing results for 
Search instead for 
Do you mean 
Posts: 1
Registered: ‎11-12-2012
Message 1 of 6 (1,984 Views)

DSC T300 vibration

While recalls are being done for the T100 and T20, why aren't the T300 with the identical problem being taken care of? I have been transferred to three different help desks now with absolutely no resolve. Any suggestions?
Posts: 3,846
Registered: ‎11-12-2012
Message 2 of 6 (1,984 Views)

Re: DSC T300 vibration

Thank you for your post
There is a Product Alert for the DSC-T20 as shown here, this is not a Recall: ... mdl=DSCT20 Please note the Free repair offer for the DSC-T20 ends Today July 16 2012
Currently there is not a Product Alert for the DSC-T100, DSC-T200 or DSC-T300.

If Your DSC-T300 takes a long time to turn on and at the same time vibrates, shakes, or makes a grinding noise, then service will be required. Click this link here for available service options:
Posts: 1
Registered: ‎11-12-2012
Message 3 of 6 (1,983 Views)

Re: DSC T300 vibration

I have the same problem in my camera T300, I tried to contact Sony with no success. There are a lot of complaints about this problem in this and other models and Sony does not do anything. I am still waiting for a solution!
Posts: 5
Registered: ‎04-27-2013
Message 4 of 6 (1,951 Views)

Re: DSC T300 vibration

Is the problem resolved? Or have you given up on them. My HX 30 V shows the same problem n awaiting some advice
Posts: 2
Registered: ‎10-09-2013
Message 5 of 6 (1,772 Views)

Re: DSC T300 vibration

no need to spend and simple to fix.. just follow the steps in the link below

Posts: 1
Registered: ‎05-19-2017
Message 6 of 6 (419 Views)

Re: DSC T300 vibration

It took a good hour, and this blog shows a different generation camera, but in the end I got it all together! Smiley Happy Spare part found from Greek ebayer for €30 (actually I found three of them, all in Greece, go figure). I had to disassemble the spare part (two screws). Only the inside piece is to be replaced. You will need a very small screwdriver, steady hands and a magnifying glass to get the ribbon cables reinstalled. 

Get Social

Share your ideas Watch YouTube Support Videos follow us on Twitter Visit us on Facebook