Skip to the end of navigation

Welcome to the Community!

Professional Products - General

Showing results for 
Search instead for 
Do you mean 
Posts: 1
Registered: ‎10-14-2013
Message 1 of 2 (1,539 Views)

On a ccu's rcp controller- adjusting the iris in "relative" mode

On a CCU's remote panel, we have the option to use either "Absolute" or "Relative" modes for the Iris adjust.  The relative mode gives you a smaller range, 25% of the 'closed to open' range of the camera lens.  My question is how to set which 25% of the range?  Is there a way for the operator to set  which f-stops- from say f1.8- f4 or f5.6-f11 the iris ****** will open/close the Iris?

Posts: 4
Registered: ‎09-30-2017
Message 2 of 2 (573 Views)

Re: On a ccu's rcp controller- adjusting the iris in "relative" mode

[ Edited ]

You are not mentioning what kind of RCP you are using, but lets pretend you are using a 1500 like I usually do.


When in relative you adjust the span on a small ****** called COARSE.


You can also adjust how big your relative span is suppose to be under Config > RCP > VR settings > Iris/M.Black.


Best Regards,


Get Social

Share your ideas Watch YouTube Support Videos follow us on Twitter Visit us on Facebook