Skip to the end of navigation

Welcome to the Community!

Television - General

Showing results for 
Search instead for 
Do you mean 
Posts: 1
Registered: ‎04-20-2017
Message 1 of 1 (372 Views)

KDL42EX440 will not power on, no LEDs


My KDL42EX440 was working and then was dead.  I think I had some type of power surge that took out a blu-ray player, DirecTv receiver HDMI port and a PC power supply that was connected to the VGA port.  The only common component is the main board with the HDMI and VGA reside.  I tied different outlets, swapped batteries in the remote, tried to manually turn it on and tried the Home/Power on trick but no go.


I ordered a Power Supply board that is supposed to be good but same result.


I ordered a new main board but ended up with a newer board that isn't compatable with my tv, the ribbon cable s smaller than the connector on the new board.  The exact board (1P-0124J00-4010) is out of stock on every site I looked at and the 1P-0125J01-4011 will not work.


I even checked the power cord to make sure it okay.


Any ideas?  The screen is perfect and the it worked great right up until it died.  


I'm guessing the main baord failed and it controls the power on.


Get Social

Share your ideas Watch YouTube Support Videos follow us on Twitter Visit us on Facebook