Skip to the end of navigation

Welcome to the Community!

XDCAM - Decks

Showing results for 
Search instead for 
Do you mean 
Reply
Highlighted
Enthusiast
Posts: 1
Registered: ‎02-20-2014
Message 1 of 1 (1,924 Views)

2 machine edit audio problems

I have two XDCam machines hooked up “the old fashioned way”, that is a PDW-F1600 (recorder) and a PDW-HD1200 (player) with an RM-280 Editing Controller.

The audio is wired via the analogue outputs of the “player”, through an analogue mixer and back into the analogue inputs of the “recorder”.

When I then try to edit Audio (wild sound or music) recorded onto the recorder channel 2 mixed with audio (voiceover) via a mic, mixed through the analogue audio mixer, onto channel 1 of the recorder there is a noticeable “audio jump” at the edit point.

Previous VTR edit setups using the same analogue audio configuration from Betacam through to digital Betacam have never produced this effect.

Is this the D/A A/D conversion? Or is the system not designed to operate this way? Or perhaps it's a problem somewhere with the settings?

Does anyone have a similar problem?

Get Social

Share your ideas Watch YouTube Support Videos follow us on Twitter Visit us on Facebook
Users Online